This page enables you to modify the default self-signed device certificate that is automatically established on the printer when it is needed. If you do not create a self-signed device certificate, the default self-signed device certificate is used. Using the self-signed device certificate is sufficient to ensure encrypted communication, but your browser may display a warning message when you first open an encrypted page.

The self-signed device certificate appears in the list on the Manage Certificates page, where it can be selected for viewing, and saved as either a base-64 encoded (PEM) or binary encoded (DER) file.

After you enter information as desired, click Finish to create the self-signed certificate, click Back to return to the previous page, or click Cancel to return to the Manage Certificates page.

Note: All fields on this page are required.

2 Letter County Code - Enter the 2 Letter County Code in this field. This field is case sensitive, and accepts two letter uppercase ASCII or Extended ASCII character combinations. Numbers are not allowed. For a complete list of county codes, see the Country Code table.

State/Province Name - Enter the State or Province Name in this field. This field accepts ASCII or Extended ASCII characters, including numbers. State/Province Name can be 128 characters maximum.

Locality Name - Enter the Locality Name (town or city) in this field. This field accepts ASCII or Extended ASCII characters, including numbers. Locality Name can be 128 characters maximum.

Organization Name - Enter the Organization Name in this field. This field accepts ASCII or Extended ASCII characters, including numbers. Organization Name can be 64 characters maximum.

Organization Unit - Enter the Organization Unit in this field. This field accepts ASCII or Extended ASCII characters, including numbers. Organization Unit can be 64 characters maximum.

Common Name - This field displays the Fully Qualified Domain Name (FQDN) of the printer. Common Name can be up to 64 characters maximum. This field accepts valid IP addresses and DNS names.

Valid Period (days) - Enter the length of time in days that the certificate is valid. The default is 1825 days (5 years).

Friendly Name - Enter a meaningful Friendly Name to identify the certificate. Friendly Name can be up to 64 alphanumeric characters in length. Friendly Name is only used to identify the certificate during configuration. It is not used by any authentication protocol.

Country Codes