Link: CentreWare IS Help Home page
Phaser® 8860 Help
Information Index
IPP Settings Help

Internet Printing Protocol (IPP) is the industry standard network printing protocol.

IPP - Select On to enable the port. The default setting is On.

Network Path - The field displays the printer's URL.

Page Description Language - Select the language you want the printer to receive on the IPP port. If you select AutoSelect, the printer automatically detects the language of the print job and processes it accordingly. 

Filtering - This field enables you to select whether or not the printer reacts to control characters included in files. Options are InterpreterBased or None. In most cases, Filtering should be set to None.

Authentication Scheme - This field enables you to choose which type of authentication scheme to use when printing with IPP. These schemes are only used if the printer has both a user name and password entered for IPP.

  • basic - This scheme requires the printer to authenticate the person sending the print job. The printer only services the request if the name and password provided by the user match the values stored in the printer.
  • digest - This scheme requires the printer to authenticate the person sending the print job using a single checksum password scheme. The printer only services the request if the name and password provided by the user match the values stored in the printer.

Note: These options comply with IETF standard RFC's for basic and digest authentication, but not all IPP clients support these authentication methods.

User Name - Enter the user name for the printer. This field can contain a maximum of 10 characters.

Password/Verify Password - Enter the printer password and verify. This field can contain a maximum of 10 characters.

COPYRIGHT© 2007 XEROX CORPORATION. All Rights Reserved.
Link: Xerox website