Colombia> change country
Phaser 300X


Enabling and disabling SysStart Job execution
The Set SysStart Job (SYSTART.PS) file enables automatic execution of a file named SysStart (if one is found) on a hard disk connected to the printer's SCSI port, each time the printer is turned on or reset. The SysStart job is similar to an Init file; it executes automatically each time the printer is turned on.

Use the following files for your computer type:
Macintosh file name PC file name
Set SysStart Job
No SysStart Job and
LaserWriter Utility		 SYSTART.PS NOSYSSTR.PS

Macintosh users

  1. Install the utility files from the Phaser 300X printer's CD-ROM; refer to "Installing the printer's software" for instructions.
  2. Select the appropriate printer in the Chooser.
  3. Locate the LaserWriter Utility in the PhaserTools folder on your hard disk, and double-click its icon to start the application.
  4. Choose Download PostScript File from the Utilities menu.
  5. Select one of the following files from the list, then click Open. (These files were installed in the Printer Utilities folder inside the PhaserTools folder.)
  6. At the prompt Save PostScript output as: you are asked for a file name for saving printer output. Use either the default name given in the edit box or type a new name.
  7. Click Save to send the file to the printer.
  8. If no output is returned by the printer, the LaserWriter Utility displays a dialog box; click OK to continue.

PC and workstation users

  1. Copy the utility files from the Phaser 300X printer's CD-ROM, or use the files directly from the CD-ROM.
  2. Select one of the following:
  3. Use one of the following methods to send the desired file to the printer:
Support Home Page
Phaser 300X Support Page

Network Printers Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program