Use this page to configure settings for the paper trays installed in the printer. Tray 2 is optional, and only appears as a selection when it is installed.

To use the print driver settings to select the Bypass Tray mode, under Tray Settings select Bypass Tray Use Driver Settings for Print Job.

To configure trays:

Paper Size - Select the paper size from the list.

Paper Type - Select the paper type from the list.

Display Prompt - Enable or disable the message that prompts you to set the paper size and type every time you load paper in the tray. The default setting is Off.

Custom Size - Y - Specify the length of your custom paper using a number in the range indicated.

Custom Size - X - Specify the width of your custom paper using a number in the range indicated.

Tray Priority - Specify the order in which the printer selects trays for a print job when a tray has not been otherwise specified.

When you are satisfied with your selections, click Save Changes to keep the settings or Discard Changes to keep the previous settings.