Empty Waste Tray

The system has stopped printing because the waste tray (labeled B) is full.

To empty the waste tray:

  1. Open the side door.

    Graphic illustrates this step.
  2. Pull the waste tray (labeled B) completely out of the system.

    Warning: The waste tray may be hot; handle it carefully.

    Graphic illustrates this step.
  3. Empty the waste tray into a waste container. Ink is non-toxic and can be discarded as normal office waste.

    Graphic illustrates this step.
  4. Insert the waste tray and push it completely into the system.

    Note: The waste tray must be out of the system for more than 5 seconds or you will continue to receive a Waste Tray Full message.

    Graphic illustrates this step.
  5. Close the side door.

    Graphic illustrates this step.