Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.
Phaser 840


Setting IP parameters: Phaser 840 printer front panel
  1. When the front panel displays READY TO PRINT, press the down arrow button until Menu is highlighted. Press Select.
  2. Press the down arrow button until Printer Configuration is highlighted. Press Select.
  3. Press the down arrow button until Network Settings is highlighted. Press Select.
  4. Press the down arrow button until TCP/IP is highlighted. Press Select.
  5. Set the IP address:
    1. Press the down arrow button until IP Address is highlighted. Press Select.
    2. Press the left or right arrow buttons to highlight the 3-digit part of the address that you want to set. Press the up or down arrow keys to change the numbers.
    3. When the address is set, press Select.
  6. Set the network mask:
    1. Press the down arrow button until NW Mask is highlighted. Press Select.
    2. Press the left or right arrow buttons to highlight the 3-digit part of the address that you want to set. Press the up or down arrow keys to change the numbers.
    3. When the address is set, press Select.
  7. Set the default router/gateway address:
    1. Press the down arrow button until Default Router/Gateway Address is highlighted. Press Select.
    2. Press the left or right arrow buttons to highlight the 3-digit part of the address that you want to set. Press the up or down arrow keys to change the numbers.
    3. When the address is set, press Select.
  8. To return the printer to normal operation, press the down arrow button until Exit is highlighted. Press Select.

Return to Topic List
Support Home Page
Phaser 840 Support Page

Xerox Office Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program