Proper management of environmental resources protects the well-being of our employees, customers, shareholders, and the communities we are a part of worldwide.
Tektronix establishes and maintains sound environmental management practices to accomplish this goal and to assure compliance with the laws, regulations, and orders of the responsible governmental authorities wherever Tektronix and its subsidiaries operate.
Tektronix, Incorporated is complying with government regulations by providing Material Safety Data Sheets for this product.
Color Printing and Imaging Division
Tektronix, Incorporated
MSDS for Silicone Oil
SECTION 1- PRODUCT IDENTIFICATION
Trade Name: Tektronix Silicone Intermediate Transfer Layer Fluid, impregnated into printer's maintenance roller.
Tektronix Part Number: 016-1822-00 (replacement standard maintenance kit)
Tektronix Part Number: 016-1834-00 (replacement extended maintenance kit)
Product Use: Tektronix Phaser® 850 color printers
SECTION 2 - INFORMATION ON INGREDIENTS
Tektronix Silicone Intermediate Transfer Layer Fluid is a proprietary blend of silicone oils. Specific identities of components, and their percentage composition, are withheld as a trade secret.
SECTION 3 - HAZARDS IDENTIFICATION
ROUTES OF EXPOSURE: Skin, eyes
POTENTIAL HEALTH EFFECTS: Health effects from this product are expected to be negligible, when product is used as intended.
Immediate Effects:
Inhalation: Not an expected route of entry
Skin: May cause mild irritation.
Eyes: May cause mild irritation.
Ingestion: Not an expected route of exposure.
Chronic Effects: None known or expected.
SIGNS AND SYMPTOMS OF EXPOSURE
Mild skin or eye irritation.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
None known.
SECTION 4 - FIRST AID MEASURES
INHALATION: Not a route of exposure for this product.
EYES: Flush thoroughly with water. Seek medical attention if symptoms occur.
SKIN: Wash thoroughly with soap and water. Seek medical attention if symptoms of irritation occur.
INGESTION: Not a route of exposure for this product.
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: Flash point of fluid is 226 degrees C, Pensky-Martens closed-cup tester.
EXTINGUISHING MEDIA: All extinguishing agents classified as B and C are effective, including dry powder(s), CO2, and halon.
FIRE FIGHTING INSTRUCTIONS: As for any fire, wear self-contained breathing apparatus, pressure demand, MSHA/NIOSH approved, and protective gear.
FIRE AND EXPLOSION HAZARDS. During a fire, irritating and toxic substances may be generated by thermal decomposition or combustion. No unusual fire hazards expected.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
SPILL OR LEAK: Fluid is impregnated into maintenance roller. Small amounts (i.e., drops) may result from normal handling. Absorb and place in an appropriate disposal container. Clean spills thoroughly because residue can be slippery.
SECTION 7 - HANDLING AND STORAGE
HANDLING: Wash hands with soap and water after contact. Clean spills per SECTION 6.
STORAGE: No special requirements.
SECTION 8 - EXPOSURE CONTROL - PERSONAL PROTECTION
No special protection indicated when used as intended.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: Clear liquid impregnated into maintenance roller.
ODOR: Mild
SOLUBILITY IN WATER: No data
SPECIFIC GRAVITY: Specific gravity of fluid is 0.97 (water=1)
SECTION 10 - STABILITY AND REACTIVITY
STABILITY: Stable.
INCOMPATIBILITY WITH OTHER MATERIALS: Strong oxidizing agents
HAZARDOUS DECOMPOSITION PRODUCTS: At elevated temperatures, formaldehyde may be generated.
HAZARDOUS POLYMERIZATION: Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
No toxicology data on mixture.
SECTION 12 - ECOLOGICAL INFORMATION
Not available.
SECTION 13 - DISPOSAL CONSIDERATIONS
Fluid is not listed as RCRA hazardous waste. Dispose of in accordance with federal, state, and local regulations.
SECTION 14 - TRANSPORT INFORMATION
DOT: Not regulated.
SECTION 15 - REGULATORY INFORMATION
The following information pertains to the ingredients of Tektronix Silicone Intermediate Transfer Layer Fluid:
TSCA (Toxic Substances Control Act): Listed in the TSCA inventory as verified by our suppliers.
California Proposition 65: Not regulated.
SARA (Superfund Amendment and Reauthorization Acts): Not listed in SARA Section 313. Not listed as SARA Extremely Hazardous Substance.
RCRA (Resource Conservation and Recovery Act): Not listed as RCRA hazardous wastes.
The ingredients of this fluid are not listed as carcinogenic by OSHA, IARC or NTP.
SECTION 16 - OTHER INFORMATION
Original preparation date: September 17, 1999.
Prepared by CPID Environmental, Health, and Safety/JMP
Tektronix, Incorporated
P.O. Box 500
Chemical Documentation
Mail Stop 46-825
Beaverton, Oregon 97077
Printer information: 1-800-835-6100
MSDS information: (503) 685-2758
MSDS for Ink Sticks
SECTION 1 - PRODUCT IDENTIFICATION
Trade Name: Tektronix Part Number:
ColorStix® Ink, Black 016-1831-00, 016-1831-50
ColorStix® Ink, Cyan 016-1825-00, 016-1828-00
ColorStix® Ink, Magenta 016-1826-00, 016-1829-00
ColorStix® Ink, Yellow 016-1827-00, 016-1830-00
Four color "rainbow" pack 016-1833-00
Product Use: Tektronix Phaser® 850 Color Printer
SECTION 2 - INFORMATION ON INGREDIENTS
Ingredients
Fatty amide waxes
Rosin ester
Phthalate ester
Black, cyan, magenta, or yellow dye
The specific identity of ingredients, and their percentage composition, are withheld as a trade secret.
Tektronix ColorStix® solid-ink sticks are considered articles under US OSHA Hazard Communication Standard, 29CFR1910.1200. This Material Safety Data Sheet is provided as a customer service.
SECTION 3 - HAZARDS IDENTIFICATION
ROUTES OF EXPOSURE: Skin
POTENTIAL HEALTH EFFECTS
Immediate effects: None are known or expected. See Section 11 for toxicology test information.
Long term effects: None are known or expected.
Carcinogenicity: None of the ingredients of this product are listed as carcinogens by IARC, NTP,
or OSHA.
SIGNS AND SYMPTOMS OF EXPOSURE: None expected.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None expected.
SECTION 4 - FIRST AID MEASURES
EYE: Contact unlikely. If particles get into eye, flush thoroughly with water.
SKIN: Wash skin thoroughly with soap and water.
INHALATION: Not applicable
INGESTION: Not applicable
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: Above 200 degrees C (392 degrees F).
EXTINGUISHING MEDIA: All extinguishing agents classified as B and C are effective including dry powder(s), CO2, and halon.
FIRE FIGHTING INSTRUCTIONS: As in any fire, wear self-contained breathing apparatus, pressure demand, MSHA/NIOSH approved, and full protective gear.
FIRE & EXPLOSION HAZARDS: These inks will burn. During a fire, irritating and toxic gases may be generated by thermal decomposition or combustion. No unusual fire hazards expected.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
SPILL OR LEAK: Not applicable.
SECTION 7 - HANDLING AND STORAGE
HANDLING: No special precautions.
STORAGE: Avoid high temperatures. Keep ink below 70 degrees C (160 degrees F).
SECTION 8 - EXPOSURE CONTROL - PERSONAL PROTECTION
EXPOSURE GUIDELINES: None established
ENGINEERING CONTROLS/PERSONAL PROTECTION: No special protection indicated when used as intended.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE/ODOR: Waxy solid. Black, blue, red, or yellow in color. Odorless.
SOLUBILITY: Not water-soluble.
SPECIFIC GRAVITY: 0.99
SECTION 10 - STABILITY AND REACTIVITY
STABILITY: Stable.
INCOMPATIBILITY WITH OTHER MATERIALS: None.
HAZARDOUS POLYMERIZATION: Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
TOXICITY: Not toxic, as determined by standard laboratory tests for acute oral toxicity.
SKIN IRRITATION: Not a primary skin irritant, as determined by standard laboratory tests.
SKIN SENSITIZATION: Not a skin sensitizer, as determined by standard laboratory tests.
CARCINOGENICITY: Components or product not listed as carcinogens by IARC, NTP, or OSHA.
SECTION 12 - ECOLOGICAL INFORMATION
No known impact.
SECTION 13 - DISPOSAL CONSIDERATIONS
This product is not a hazardous waste as specified in 40CFR 261. TCLP below hazardous waste levels set by EPA. Manage and dispose of waste in accordance with all federal, state, and local regulations.
SECTION 14 - TRANSPORT INFORMATION
D.O.T.: Not regulated.
SECTION 15 - REGULATORY INFORMATION
TSCA: All components of these inks are listed in the Toxic Substances Control Act inventory as verified by our suppliers.
RCRA (Resource Conservation and Recovery Act): Not a hazardous waste as specified in 40CFR261. TCLP below hazardous waste levels set by EPA.
CALIFORNIA PROPOSITION 65: Not regulated.
SARA (Superfund Amendment and Reauthorization Act): Not regulated.
SECTION 16 - OTHER INFORMATION
Original preparation date: December 1, 1999
Prepared by CPID Environmental, Health, and Safety/JMP
Tektronix, Incorporated
P.O. Box 500
Chemical Documentation
Mail Stop 46-840
Beaverton, Oregon 97077
Printer information: 1-800-835-6100
MSDS information: (503) 685-2758
MSDS for CleanTex® Alcopad
Section 1 - Product Identification
Trade name: Tektronix Part Number:
Alcopad 016-1845-00
PRODUCT IDENTIFICATION NUMBERS: 806B, 806C, 806H, 806T, 806Z, 806
CHEMICAL NAME AND SYNONYMS: Isopropyl Alcohol
CHEMICAL FORMULA: CH2CH(OH)CH3
EMERGENCY TELEPHONE NUMBERS: CHEMTREC (Transportation): 1-800-424-9300
Product Use: Tektronix Phaser® 850 Color Printer
Section 2 - Information On Ingredients
Component CAS# % OSHA PEL (ppm) ACGIL TLV (ppm)
Isopropyl alcohol 67-63-0 91.0 400 400
Deionized water 7732-18-5 9.0 NA NA
Section 3 - Hazards Identification
Product is distributed as a single-use, presaturated pad, in which all the liquid is absorbed by the applicator. Isopropyl alcohol is a flammable liquid. Eye contact will cause local irritation and burning sensations with possible injury if not removed promptly. Repeated or prolonged contact with skin may produce irritation and cause dermatitis. Exposure above TLV may cause irritation of respiratory tract and eyes along with headaches, dizziness and CNS effects. May be harmful if swallowed.
Carcinogenicity (OSHA/NTP/IARC/ACGIH): Not Listed.
Medical Conditions Aggravated by Exposure: Not Listed.
Section 4 - First Aid Measures
EYE CONTACT: Flush with water for 15 minutes, including under eyelids. Get Medical help.
SKIN CONTACT: Flush with water.
INHALATION: Remove to fresh air. Keep at rest. Restore and/or support breathing as needed. Get prompt Medical attention.
INGESTION: In the unlikely event of ingestion of a wiper, first aid measures should focus on removal of the object and preventing choking. Once removed, keep affected person at rest. Call physician immediately.
Section 5 - Fire-Fighting Measures
FLASH POINT (TCC): 56 degrees F
FLAMMABLE LIMITS (% BY VOLUME): LEL: NA UEL: NA
AUTOIGNITION TEMPERATURE degrees F (degrees C): NA
EXTINGUISHING MEDIA: Isopropyl-alcohol fires may be extinguished using carbon dioxide, dry chemical or alcohol foam. Water may be used to cool containers exposed to the fire.
UNUSUAL FIRE OR EXPLOSION HAZARDS: Isopropyl alcohol may release vapors which may ignite at or above flash point.
NFPA RATING: HEALTH (1)
FLAMMABILITY (3)
REACTIVITY (0)
Formulation is classified as an OSHA Class IB Flammable Liquid
NA = Not Available
Section 6 - Accidental Release Measures
Since the isopropyl-alcohol solution is completely absorbed by the applicator and the amount of isopropyl alcohol per applicator is small, the chance of a significant spill occurring is small. In the event however, that a significant amount of liquid is released, ventilate the area, especially low areas where vapors may collect, and remove all sources of ignition. Cleanup personnel need protection against liquid contact and vapor inhalation.
Section 7 - Handling And Storage
Store in a clean, cool, ventilated area away from sources of ignition and oxidizing agents. Handle and store in a manner suitable for an OSHA class IB Flammable Liquid. Electrical services must meet applicable codes. Use non-sparking tools.
Section 8 - Exposure Control - Personal Protection
Provide ventilation to maintain TLV. Use non-sparking tools. Avoid inhalation of vapors, contact with eyes and repeated or prolonged contact with skin. Do not take internally.
Section 9 - Physical And Chemical Properties
BOILING POINT (80 degrees C) (180 degrees F)
% VOLATILE BY VOLUME @ 25 degrees C: 100
VAPOR PRESSURE (mmHg @ 25 degrees C): 33
EVAPORATION RATE (BUTYL ACETATE-1) >1
VAPOR DENSITY (AIR = 1): <1
FORM: liquid
% SOLUBLE IN WATER @ 25 degrees C: 100
ODOR: alcohol
SPECIFIC GRAVITY (G/CC @ 25 degrees C): 0.79
APPEARANCE OF LIQUID: clear
Section 10 - Stability And Reactivity
STABILITY: Stable
HAZARDOUS POLYMERIZATION: Will not occur.
INCOMPATIBILITIES / CONDITIONS TO AVOID: Caustics, amines, alkanolamines, aldehydes, ammonia, strong oxidizing agents and chlorinated compounds.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide
Section 11 - Toxicological Information
Not Available
Section 12 - Ecological Information
Not Available.
Section 13 - Disposal Considerations
Follow Federal, State and Local Regulations.
Section 14 - Transport Information
DOT CLASSIFICATION: Not Regulated.
Proper Shipping Name:
Hazard Class:
UN Number:
Packing Group:
Hazard Labeling:
IATA / ICAO CLASSIFICATION: Not Regulated.
Proper Shipping Name:
Hazard Class:
UN Number:
Packing Group:
Hazard Labeling:
IMDG CLASSIFICATION: Not Regulated.
Proper Shipping Name:
Hazard Class
IMDG Page #
Packing Group:
Flash Point (degrees C):
Marine Pollutant:
Section 15 - Regulatory Information
SARA TITLE III REPORTING:
Toxic Chemical (Section 313): Not Listed.
Extremely Hazardous Substance: Not Listed.
Section 302, 304, 311, 312)
Hazard Class:
Chronic Health: Yes
Acute Health: Yes
Fire Hazard: Yes
Pressure Hazard: No
Reactivity Hazard: No
TSCA INVENTORY STATUS: All components listed are on the TSCA inventory.
Section 16 - Other Information
The information provided herein is compiled from internal reports and data from professional publications. It is furnished without warranty of any kind, expressed or implied. It is intended solely to assist in evaluating suitability and proper use of the material and in implementing safety precautions and procedures. Employees should use this information as a supplement to other information gathered by them and must make independent determination of suitability and completeness of information from all sources to assure proper use of these materials. All information used must be determined by the user to be in accordance with applicable federal, state and local laws and regulations.
Prepared by:
CleanTex Products
33 Murray Hill Drive
Nanuet, NY 10954
June 1997
