Link: CentreWare IS Help
WorkCentre 6605 Help
Information Index
Xerox Secure Access Settings Help

When Xerox Secure Access is enabled, users swipe a pre-programmed identification card through a proximity card reader at the control panel. To use this method, purchase and install a USB card reader and an authentication server that supports the Convenience Authentication API.

Note: When you register the printer, most authentication servers automatically configure the Xerox Secure Access server setting. If you are prompted to set the fields manually, you can set the IP Address/Host Name and Path fields as specified in your authentication server documentation.

  1. For IP Address/Host Name and Port, type the appropriately formatted address and port number.
  2. For Path, type the HTTP path that your authentication server provides.
  3. Enter additional information as needed
    • Connection Time-Out: This option sets the length of time the printer waits for a response from the server before it cancels the operation.
    • Alternate Login: When an authentication server enables the feature, this setting provides an option for the user to enter login credentials using a keyboard.
    • Default Title and Default Prompt: These fields set the instructional text that appears when the user attempts to enter a locked service.
  4. For USB Card Reader, choose a detection policy.
  5. Click Save Changes.
COPYRIGHT © 2014 Xerox Corporation. All Rights Reserved.
Link: Xerox website