Link: CentreWare IS Help
WorkCentre 6605 Help
Information Index
SSL Help

Secure Sockets Layer (SSL) is a protocol that creates an encrypted connection between your printer and a server.

To configure SSL:

  1. For Enable SSL, select the Enable SSL check box.
  2. For Encryption Strength, select an option.
  3. For Port Number, type a valid port number. Port 443 is the default port for all HTTPS URLs and is set as the default.
  4. To set encryption for data transmitted between the printer and server, for LDAP - SSL/TLS Communication, select Enabled.
    Note: If you do not select Enabled, queries to the LDAP server are not encrypted. SSL encryption is still used for your connection over HTTP even if LDAP is not encrypted.
  5. For SMTP – SSL/TLS Communication, select the option for the security level that your SMTP server requires.
    • STARTTLS (if Available): This option scans for STARTTLS compatibility and, if available, uses it.
    • STARTTLS: This option is for servers that require STARTTLS.
    • SSL/TLS: This option is for servers that require SSL/TLS.
  6. To ensure that remote server certificates are verified, select Verify Remote Server Certificate.
  7. To upload a digital certificate, click Upload Signed Certificate.
  8. To manage digital certificates, click Certificate Management.
  9. To delete all certificates, click Delete All Certificates.
  10. Click Save Changes.
    For the new settings to take effect, restart your printer.
COPYRIGHT © 2014 Xerox Corporation. All Rights Reserved.
Link: Xerox website