Link: CentreWare IS Help
WorkCentre 6605 Help
Information Index
Ethernet Settings Help

Ethernet Settings - This setting is the rate at which data is communicated over a physical network connection. Full Duplex mode is bi-directional communication and means that both ends of the connection can send and receive data at the same time. Half Duplex speed is also bi-directional, but can only process data in one direction at a time. This setting becomes active after you save the changes, and then restart the printer from CentreWare Internet Services or by manually switching it off and then on again. Supported values are:

  • Automatic (default setting)
  • 10Base-T Half Duplex
  • 10Base-T Full Duplex
  • 100Base-TX Half Duplex
  • 100Base-TX Full Duplex
  • 1000Base-T Full Duplex

Current Ethernet Settings - This field displays the current Ethernet transmission speed.

Machine Address - This field displays the factory-assigned hardware Ethernet (MAC) address of the printer.

When you are satisfied with your selection, click Save Changes to keep the setting or Discard Changes to keep the previous setting.

COPYRIGHT © 2014 Xerox Corporation. All Rights Reserved.
Link: Xerox website