Link: CentreWare IS Help
WorkCentre 6605 Help
Information Index
802.1x Help

Enable IEEE 802.1x - Select this check box to enable 802.1x. The IEEE 802.1x protocol allows the printer to be authenticated on a network that uses a RADIUS server. 802.1x Port Based Network Access Control is used to ensure that printers that are connected to the network have the proper authorization. The 802.1x configuration is used to authenticate the printer rather than an individual user. After the printer has been authenticated, it will be accessible to users on the network.

Authentication Method - Select the authentication method from the list presented in the drop-down list.

  • EAP-MD5
    Extensible Authentication Protocol (EAP). This method offers minimal security.
  • EAP-MS-CHAPv2
    This is the Microsoft-supported EAP method, but does not include the PEAP shell.
  • PEAP/MS-CHAPv2
    Protected Extensible Authentication Protocol (PEAP). This is an open standard authentication method and is widely supported by software vendors. EAP-MS-CHAPv2 is an inner EAP method supported by Microsoft.
  • EAP-TLS
    EAP - Transport Layer Security (TLS). This is an open standard authentication method and is widely supported by software vendors. This is the original, standard wireless LAN EAP authentication protocol.

Login Name (Device Name) - Enter the login name that will be used for authentication to the RADIUS server.

Password - Enter a password up to 7 characters in length, which is used when logging in to the printer. There is no password set by default. Password can include alphanumeric characters, hyphens (-), and underscores (_).

Certificate Validation - Enable to have the printer validate certificates.

When you are satisfied with your selections, click Save Changes to keep the settings or Discard Changes to keep the previous settings.

COPYRIGHT © 2014 Xerox Corporation. All Rights Reserved.
Link: Xerox website