Supported media

See Xerox supplies and accessories for supplies ordering information.

Paper

• 200-sheet capacity
• Bond or equivalent, 60 - 150 g/m ² , 16 - 40 lb.
• Heavy papers 150 - 176 g/m ² , 40 - 65-lb.; for example, cover stock 176 g/m ² or 65-lb.; single-sided printing only
• Coated or glossy papers, single-sided printing only
• Short-grained paper, 105 - 150 g/m ² , 28 - 40 lb. bond
• Xerox Premium Cover, single-sided printing only
• Xerox High Resolution Photo, single-sided printing only
• Set tray switch to Paper.

Transparencies

• 50-sheet capacity
• Use only Phaser 850 printer transparencies
• Set tray switch to Transparency.

Labels

• 50-sheet capacity
• Use only Phaser 850 printer Color Printing Labels
• Set tray switch to Paper.

Loading the tray

1. Use the tray's maximum-capacity label to determine how much paper or transparency to load.
2. Load paper with the side to be printed face-up.
• For single-sided printing, load letterhead paper with the top of the page at the front of the tray.
• For two-sided printing on letterhead, refer to Loading letterhead paper for two-sided printing.
3. Place the paper snugly against the inside left front wall of the tray.
4. Set the switch on the side of the tray for Paper or Transparency to match the loaded media. If you are loading labels in the Paper / Transparency tray, set the tray switch to Paper.
5. Insert the tray into the printer.