The lower tray is the default source for the cleaning pages that the printer uses in its cleaning procedures. When one or two High-Capacity Paper Tray Assemblies are installed, you can ensure that the printer always uses paper from the lower or middle paper tray in its self-cleaning procedures by changing a setting in the printer's front panel:

1. When the Ready to Print message is displayed, scroll to Menu and press Select.
2. Scroll to Printer Configuration; press Select.
3. Scroll to Default Printer Settings; press Select.
4. Scroll to Advanced Printer Settings; press Select.
5. Scroll to Cleaning Page Source; press Select and choose the desired tray.
6. To return the printer to the Ready to Print message, scroll to Exit; press Select.

You can also change the default through PhaserLink Printer Management software if your printer is connected to a network via TCP/IP. Simply enter your printer's IP address in a standard web browser. Refer to the PhaserShare Networking Manual or details.