|
Emptying the waste tray
|
|
When the front panel displays
Empty Waste Tray,
follow this procedure.
See Xerox supplies and accessories for supplies ordering information.
Caution
The printer's interior may be hot. Do not reach into the printer while the maintenance drawer is removed.
-
Open the front cover.
-
Grasp the maintenance drawer, labeled as
A,
and pull it out of the printer.
Note
The maintenance drawer may be locked while the ink cools after the front panel troubleshooting routine,
Eliminate Light Stripes.
Make sure all covers are closed. Wait 15 minutes before trying to remove the maintenance drawer. The maintenance drawer may also be locked during the warm up cycle whenever the printer is turned on.
|
-
The waste tray may be hot; handle it carefully.
Lift the waste tray, labeled as
B,
from the maintenance drawer.
-
Empty the waste tray by gently twisting the tray or tapping it on the sides of a waste container. Ink is non-toxic and can be discarded as normal office waste.
-
Replace the waste tray in the maintenance drawer. Make sure the waste tray is seated flat in the maintenance drawer.
-
Reinsert the maintenance drawer into the printer and close the front cover.
|
| |
|
