Phaser 850


Setting the IP address from the Phaser 850 front panel
  1. When the front panel displays READY TO PRINT, press the up-arrow button until Menu is highlighted. Press Select.
  2. Press the down-arrow button until Printer Configuration is highlighted. Press Select.
  3. Press the down-arrow button until Network Settings is highlighted. Press Select.
  4. Press the down-arrow button until TCP/IP is highlighted. Press Select.
  5. Set the IP address:
    1. Press the down-arrow button until IP Address is highlighted. Press Select.
    2. Press the right-arrow button to highlight the part of the address that you want to set. Press the up- or down-arrow buttons to change the numbers.
    3. When the address is set, press Select.
  6. Set the network mask:
    1. Press the down-arrow button until Network Mask is highlighted. Press Select.
    2. Press the right-arrow button to highlight the part of the address that you want to set. Press the up- or down-arrow buttons to change the numbers.
    3. When the address is set, press Select.
  7. Set the default router/gateway address:
    1. Press the down-arrow button until Default Router/Gateway Address is highlighted. Press Select.
    2. Press the right-arrow button to highlight the part of the address that you want to set. Press the up- or down-arrow buttons to change the numbers.
  8. To return the printer to normal operation, press the down-arrow button until Exit is highlighted. Press Select. You are prompted to reset the printer; the changes will not take effect until the printer is reset.
Support Home Page
Phaser 850 Support Page

Xerox Office Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program