These procedures are valid for Windows NT 4.x. For information about driver installation for later versions of Windows NT, visit the Xerox web site:

www.office.xerox.com/support/

The following procedures describe how to use the Xerox installer for Windows to set up the printer in Windows NT 4.x environments.

The installer's automatic setup is provided when the installer is running on an Intel-based platform, for information on Windows NT setup on non-Intel platforms, see the PhaserShare Networking Manual.

Choose the procedure appropriate for your environment:

• For installation on a server to support client-server printing or for installation on a workstation for peer-to-peer printing, see the next topic, Installation on servers or on workstations for peer-to-peer printing .
• For installation on workstations when print jobs are to be sent through a print server to the printer, see Installation on workstations for client-server printing.

The Xerox Installer for Windows automatically performs the following functions to set up your printer:

• Locates your printer on the network.
• Suggests an IP address for the printer if one has not already been assigned (for example, from the front panel or by DHCP). You are given the opportunity to accept the automatically assigned address or assign a different one. For information on other methods of setting the printer's IP address, see Setting the Printer's IP Address.
• Installs Microsoft TCP/IP Printing Services (if not already installed).
• Installs the driver.
• Creates a printer in the Printers window.

Installation on servers or on workstations for peer-to-peer printing

Installation on workstations for client-server printing