|
|
|
Phaser® 840: Installing the optional IDE drive |
|
|
After the video loads, click  to start the video. Back to Video List
- To install the optional IDE drive, first turn off the printer.
- Disconnect the rear panel cables if they obstruct your work. If the printer has a network card, remove it. Otherwise, remove both metal plates on the back of the printer.
- Remove the hard disk from its packaging and slide it into the upper slot. Firmly push it into place and install the mounting screws.
- Insert the network card, or attach the lower slot cover plate, and install the mounting screws.
- Reconnect the cables and turn on the printer.
|
|
| |
|
