Phaser 840


 
Phaser® 840: Emptying the waste tray
After the video loads, click to start the video.    Back to Video List

When you see the front panel message Waste Tray "B" Full, it is time to empty the waste tray.

  1. Open the printer's front cover and remove the maintenance drawer "A" by grasping the front edge of the drawer and lifting up while sliding it out of the printer.

    Be careful to avoid touching any hot surfaces inside the printer.

  2. Lift the waste tray from the maintenance drawer and empty it. This used ink should be treated as normal office waste. Never reuse waste ink.
  3. Insert the waste tray back into the maintenance drawer "A," and reinstall the maintenance drawer into the printer.
Support Home Page
Phaser 840 Support Page

Xerox Office Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program