Automatic duplex printing requires that the Lower Tray Assembly be installed.

1. Make sure that the Duplex Unit is inserted in the printer's upper ( a ) slot.

Never put media in the Duplex Unit; the printer will report a media jam.

2. Load 75 - 90 g/m2 (20 - 24 lb.) paper in the paper tray.

If you are using pre-printed paper, such as letterhead: Place the first side to be printed face-down. Place the top of the page under the paper tray's hooks. This example shows letterhead paper.

3. Insert the paper tray in the printer's middle ( b ) or lower ( c ) tray slots.


 



For best results with duplex printing,
use 90 g/m2 (24 lb.) laser paper.

4. Decide on a binding preference (how the page turns) for Step  5 :

5. In the Print screen, s elect the Duplex option and a binding preference:

Macintosh Drivers:
LaserWriter 8.5.1	From the pull-down menu, choose Layout. Select Print on Both Sides. Select a binding preference.
LaserWriter 8.3.4	Click Options. Select 2-Sided Printing. Select Short-Edge Binding or Long-Edge Binding.
PC Drivers:
Windows 95/Windows 98	Click Properties. Click Paper. Click More Options and select your binding preference.
Windows NT4	Click Properties. Click Advanced. Under Paper/Output, select your option for Print on Both Sides.