Phaser 560


Selecting a language for the front panel
By default, the front panel is set to display messages in English. If the Kanji font SIMM is installed, front panel messages display, by default, in Japanese. Use the printer's front panel to change the default to any of these languages: Spanish, French, German, Italian, English, or Japanese.

  1. When the printer is on and the Ready message appears, press the Menu button. You see this message:

    Help Pages

    <--- ---> Menu

    Pressing the left arrow button (<---) scrolls backward through the selections; pressing the right arrow button (--->) scrolls forward through the selections; and Menu enters the currently displayed menu.

  2. Using the left (<---) or right (--->) arrow buttons, scroll through the selections until you see this message:

    Language

    <--- ---> Menu

  3. Press the Menu button to enter the language selection menu. You see this message:

    Language:English*

    <--- ---> OK

    where the asterisk (*) indicates the currently selected language.

  4. Press the right arrow button until the display shows the language you want from these selections:

    Language:English

    Language:Español

    Language:Français

    Language:Deutch

    Language:Italiano

    Language:(Japanese)

  5. Press OK to select the language. Press the button until Ready is displayed in the selected language.

Support Home Page
Phaser 560 Support Page

Network Printers Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program