EtherTalk Settings Help
EtherTalk - Allows you to enable and disable the protocol. The default value is
On.
Printer Name - Allows you to set the printer's
EtherTalk name. This field can contain a maximum of
32 characters.
Printer Type - Allows you to set the printer's
EtherTalk type to a maximum of
32 characters.
Zone - Allows you to change the printer's
EtherTalk zone. The zone must be
32 characters or less. Null characters cannot be used. The zone entered must be a zone that the printer is on.
Network Node - Reports the node ID established by the
EtherTalk protocol.
Page Description Language - Shows the printer's Page Description Language.
EtherTalk only uses
PostScript.
Filtering - This field allows you to select whether or not the printer strips out control characters. Options are
InterpreterBased or
None. In most cases,
Filtering should be set to
None.
|