|
Repacking your printer
|
- Turn off the printer; remove all cords and cables.
- Remove the paper tray(s). Pack them for shipping or storage.
- If you have a Lower Tray Assembly:
- Disconnect the Lower Tray Assembly cable from the printer.
- Lift the printer up and away from the Lower Tray Assembly.
- Repack the Lower Tray Assembly in its original shipping box.
- Push the button to open the top cover.
- Remove the transfer roll from the tray and pack it for shipping or storage. The transfer roll tray remains inside the printer.
- Replace the packing material (the foam blocks connected by a strip of red tape) on both sides of the drum.
- Open the front cover panel by pulling it forward.
- Replace the foam sheets inside the top cover and the front cover panel. Secure them with adhesive tape.
- Close the top cover and the front cover panel. Secure the top and front covers with adhesive tape.
- Repack the printer in the Tektronix shipping box. Keep the printer level when moving.
Note: To keep your warranty valid, you must ship the printer in its
Tektronix shipping box with the appropriate packing materials.
Call Tektronix if you need a replacement box. Also, if you are
returning the printer for service, call Tektronix for a return
authorization number.
|
| |
|
