---

Note: Monochrome PCL5 is optional and must be authorized before you can use it; refer to the Phaser 350 On-line Reference Guide for instructions.

---

1. Print a copy of the printer's configuration page to see the language mode on each port. Refer to the Phaser 350 On-line Reference Guide for instructions on printing a configuration page.

2. If the printer port you are using has the wrong language set for the type of application you are using, send one of the following utility files to the printer:
   • To print PostScript files, use the PSCRIPT.PS file to set up a port to receive PostScript. Refer to the Phaser 350 On-line Reference Guide for details.

   • To print HP-GL files, use the HPGL.PS file to set up a port to receive HP-GL. Refer to the Phaser 350 On-line Reference Guide for details.

   • To print PostScript, or HP-GL, or Monochrome PCL5 files interchangeably, use the AIS.PS file to set up a port for automatic language selection. Refer to the Phaser 350 On-line Reference Guide for details.