---

Note: Only use the following procedure if your computer is connected to the printer through the parallel port.

---

• Tektronix driver for Windows 3.1

• AdobePS 3 driver

1. From the Control Panel, double-click the Printers icon.

2. In the Printers dialog box, choose your printer from the list of installed printers, and click Setup.

3. From the Setup dialog box, click Options.

4. In the Options dialog box, click Advanced.

5. In the Advanced Options dialog box, select Use PostScript Level 2 Features.

1. From the Control Panel, double-click Printers.

2. In the Printers dialog box, select the Tektronix Phaser 350 printer, then click Setup. A dialog box appears with the printer's name across the top.

3. Click the PostScript tab.

4. In the Performance Options field, select the Use Language Level 2 or 3 Features option.

5. Click the Job Control tab.

6. For better performance, select the Binary Mode option.

   ---

   Note: Make sure the Adobe driver is set to support Binary mode under the PostScript tab and the Job Control tab within Settings.

   ---

7. From your application, choose the Tektronix Phaser 350 as your printer.

8. Try printing the document again.