|
|
|
|
|
|
|
Part Warranty, Return and Ordering information
How to order parts or request an RMA from Xerox:
(U.S. and Canada only) Call 800-835-6100
(and follow these steps):
- Option 9 (Placing an Order)
- Option 3 (Parts and Upgrades)
- Option 1 (Phaser and DocuPrint N series printers)
Note:
Not all parts shown are available individually, but may be available as part of an assembly.
Some parts are not part numbered and therefore not orderable.
Warranty information:
All parts have a 90 day warranty.
Contact Xerox Technical Support:
800-835-6100for warranty part replacement.
Part returns: RMA is required prior to returning any part
- Unopened parts may be returned within 90 days of purchase.
- There is a 5% restocking fee for all returned parts.
Contact Xerox for a Return Material Authorization (RMA). (See "How to order parts or request an RMA from Xerox" above)
- Opened parts are non-returnable.
|
Serial Number Format
Changes to Xerox products are made to accommodate improved components as they become available. It is important when ordering parts to include the following information:
- Component's part number
- Product type or model number
- Serial number of the printer
Serial numbering. Particular fields in the serial number indicate the modification level of the printer, the date of its manufacture and the sequence number of the printer produced on that day.
The serial number is coded as follows:
- The text “S/N” followed by the serial number in the barcode.
- The barcode does not include a field identifier.
- The nine digit serial number is based on the following format:
PPP = Three digit alphanumeric product code
Product |
Model |
Voltage |
Product Code |
3450 |
B, D, DN |
110V |
PMY |
3450V |
B, D, DN |
220V |
PNC |
R -Single digit numeric revision digit. To be rolled when a major product change occurs. Initiated with a change request.
SSSSS -Five digit numeric serial number.
Serial Number Example:
PMY453072:
PMY = Product code for the 110V Printer
4 = Revision level
53072 = Serial number
Using the Parts List
- No.: The callout number from the exploded part diagram
- Part Number: The material part number used to order specific parts.
- Qty: This number represents the parts per printer, not the number of parts supplied in the actual part order.
- Name/Description: Details the name of the part to be ordered and the number of parts supplied per order.
- Parts identified throughout this manual are referenced PL #.#.#; For example, PL 3.1.10 means the part is item 10 of Parts List 3.1.
- A black triangle preceding a number followed by a parenthetical statement in an illustrated parts list means the item is a parent assembly, made up of the individual parts called out in parentheses.
- The notation “with X~Y” following a part name indicates an assembly that is made up of components X through Y. For example, “1 (with 2~4)” means part 1 consists of part 2, part 3, and part 4.
- An asterisk (*) following a part name indicates the page contains a note about this part.
- The notation (NS) next to a part indicates that pariticular part is not spared, but contained in a kit or major assembly.
- The notation “J1<>J2 and P2” is attached to a wire harness. It indicates that connector Jack 1 is attached to one end of the wire harness and connector J2 is attached to the other end that is plugged into P2.
Note:
Only parts showing part numbers are available for ordering by support. Parts not showing part numbers are available on the parent assembly.
Legend:
Indentifier |
Meaning |
C |
C-ring |
E |
E-ring |
KL |
K-clip |
S |
Screw |
|
|
Contents:
The Phaser 3450 Parts List/Diagrams are also available in PDF format
|
<< Back to Top of Page
Print Engine Parts - Main Unit
No. |
Name/Description |
Qty |
Part Number |
1 |
Base Housing |
1 |
NS |
2 |
Tray 1 Cover Assy (with 2-1, 2-2) |
1 |
802K69550 |
3 |
Tray 1 Assembly (with 3-1 ~ 3-6) |
1 |
050K55430 |
4 |
Tray 1 Link (Left) |
1 |
NS |
5 |
Tray 1 Link (Right) |
1 |
NS |
6 |
Paper Tray |
1 |
109R00722 |
7 |
Frame Assy |
1 |
NS |
8 |
Print Cartridge (5K) Print Cartridge (10K) |
1 1 |
106R00687 106R00688 |
9 |
Reg Transport Assy |
1 |
059K39130 |
10 |
Main Board (Duplex) Main Board (Non-Duplex) |
1 1 |
960K12200 960K12360 |
11 |
Main Drive Motor Assembly |
1 |
127K44860 |
12 |
Exit Motor Assembly |
1 |
127K44870 |
13 |
Power Supply Board (110 Volts) Power Supply Board (220 Volts |
1 1 |
105K27080 105K27090 |
14 |
Duplex Guide Plate (with 14-1 ~ 14-3) |
1 |
NS |
15 |
Bracket Dummy Control |
|
NS |
16 |
Laser Assembly |
1 |
122K02450 |
17 |
Cross Bar |
2 |
NS |
18 |
Tray 2 Empty Actuator |
1 |
120E26090 |
19 |
Fan DC (Main) |
1 |
127E14630 |
20 |
Stopper Fan |
|
NS |
21 |
Gear, Transfer Roll |
1 |
007N01013 |
22 |
Gear Regi Z25 |
|
NS |
23 |
Transfer Roller |
1 |
022E29520 |
24 |
Transfer Roller Bearing, Right (with 24-1 ~ 24-4) |
1 |
019E63470 |
25 |
Transfer Roller Bearing, Left (with 25-1 ~ 25-3) |
1 |
019E63480 |
26 |
Cap-M-Gear |
1 |
807E06450 |
27 |
Gear Assembly |
1 |
007K13470 |
28 |
Tray 2 Solenoid |
1 |
121E19250 |
29 |
Tray 1 Solenoid |
1 |
121E19260 |
30 |
Harness, Main Motor |
|
NS |
31 |
Harness, Motor |
|
NS |
32 |
Reg Clutch |
1 |
121E19270 |
33 |
PMO Cap TR |
|
NS |
34 |
PBA Sub Cover Joint |
1 |
110K14300 |
35 |
Bracket-P Shaft MP |
|
NS |
36 |
Bearing Pick Up |
|
NS |
37 |
Gear Pick Up Cam |
|
NS |
38 |
E-Ring |
|
NS |
39 |
CBF Harness SMPS |
|
NS |
40 |
CBF Harness MPF Joint |
|
NS |
41 |
Optional Network Interface Card (NIC) (with 41-1, 41-2) |
|
097S03130 |
42 |
Fan DC (Sub) |
1 |
127E14640 |
<< Back to Top of Page
Print Engine Parts - Covers
No. |
Name/Description |
Qty |
Part Number |
1 |
Top Cover Assembly (with 1-1 ~ 1-3) |
|
NS |
1-1 |
Front Panel (with 1-1-1 ~ 1-1-4) |
|
019E63490 |
1-2 |
Top Cvr Intlck Switch (with 1-2-1 and 1-2-2) |
|
110E14480 |
1-3 |
Top Cover (with 1-3-1 ~ 1-3-10) |
1 |
802K69560 |
2 |
Right Cover Assembly (with 2-1 and 2-2) |
1 |
802K69580 |
3 |
Rear Cover Assembly (with 3-1 ~ 3-8) |
1 |
802K69590 |
4 |
Left Cover |
1 |
802E66540 |
5 |
Front Inner Cover |
1 |
802E66550 |
6 |
Output Tray Cover |
1 |
802E66560 |
<< Back to Top of Page
Print Engine Parts - Frame 1 Assembly
No. |
Name/Description |
Qty |
Part Number |
1 |
Frame M Base |
|
NS |
2 |
Tray 1 Feed Assy (with 2-1 ~ 2-3) |
1 |
059K39080 |
2-4 |
Tray 1 Feed Roller (with 2-4-1 ~ 2-4-3) |
1 |
059K39090 |
3 |
IPR Terminal FU |
|
NS |
4 |
PMO Housing Terminal |
|
NS |
5 |
CBF Harness Fuser 220V |
|
NS |
6 |
Foot ML-80 |
|
NS |
7 |
Retard Feeder Assy (with 7-1 ~ 7-8) |
1 |
059K39100 |
8 |
Guide P Transfer |
|
NS |
9 |
PMO Holder Plate Saw |
|
NS |
10 |
IPR Plate Saw |
|
NS |
11 |
|
|
|
12 |
|
|
|
13 |
|
|
|
14 |
Guide P Regi Upper |
|
NS |
15 |
Spring ETC Lever |
|
NS |
16 |
Holder M Bushing TX |
|
NS |
17 |
Guide Plate Paper |
|
NS |
18 |
|
|
|
19 |
Exit Idler roller Assy (with 19-1 ~ 19-4) |
1 |
059K39110 |
20 |
Bearing |
4 |
013E25770 |
21 |
Exit Shaft Roller Assy |
1 |
006K29340 |
22 |
Exit Gear |
2 |
013E25780 |
23 |
Holder M Bushing Exit |
|
NS |
24 |
Transport Exit Shaft Assy |
1 |
006K29350 |
25 |
IPR Terminal TR Hawk |
|
NS |
26 |
Cap M Wire PTL Lower |
|
NS |
27 |
PBA Sub PTL2 |
|
NS |
28 |
CBF Harness Thermistor |
|
NS |
29 |
Terminal P PTL |
|
NS |
30 |
Shield P Controller |
|
NS |
31 |
Nut Hex |
|
NS |
32 |
Cable Tie |
|
NS |
33 |
Actuator Out Full |
|
NS |
34 |
Photo Interrupter |
|
NS |
35 |
Connector |
|
NS |
36 |
Paper Size Sensor Assy (with 36-1 ~ 36-3) |
1 |
110K14290 |
37 |
Harness Out Full |
|
NS |
<< Back to Top of Page
Print Engine Parts - Frame 2 Assembly
No. |
Name/Description |
Qty |
Part Number |
38 |
MEA Unit Terminal L |
|
NS |
39 |
PMO Bearing Shaft |
|
NS |
40 |
Fuser Assy 110V Fuser Assy 220V |
1 1 |
126E02480 126E02490 |
41 |
PBA Main Zener |
|
NS |
42 |
Interface PWBA |
1 |
960K12210 |
43 |
IPR P Ground OPC |
|
NS |
44 |
Tray 2 Empty Sensor Assy |
1 |
130K68290 |
45 |
IPR P GND Solenoid Feed |
|
NS |
46 |
IPR P GND SCF Main |
|
NS |
47 |
IPR P GND Regi Roller |
|
NS |
48 |
ELA HOU Varistor |
|
NS |
49 |
IPR P GND Motor Main2 |
|
NS |
50 |
IPR P GND Guide TR |
|
NS |
51 |
AC Harness Assy |
1 |
962K26720 |
52 |
Hinge M Front Guide Dup |
|
NS |
53 |
Print Cartridge Interconnect Board |
1 |
960K12310 |
54 |
|
|
|
55 |
|
|
|
56 |
Spring ETC Guide DEVE |
|
NS |
57 |
PMO Guide DEVE L |
|
NS |
58 |
PMO Guide DEVE R |
|
NS |
59 |
Terminal P TR Cardinal |
|
NS |
60 |
Sheet Cover TR |
|
NS |
61 |
IPR P Ground Plate Paper |
|
NS |
62 |
Exit Sensor |
1 |
130E11100 |
63 |
Terminal P HV Cardinal |
|
NS |
64 |
CBF Harness HVPS |
|
NS |
65 |
CBF Harness Connector |
|
NS |
66 |
CBF Harness Sensor |
|
NS |
67 |
Tray 2 (Tray 3) Feed Assy (with 67-1, 67-2, 67-4 ~ 67-13) |
1 |
059K39120 |
67-3 |
Tray 2 (Tray 3) Feed Roller |
2 |
022E29530 |
68 |
Tray 2 (3) Retard Assy (with 68-1 ~ 68-13) |
1 |
022E29540 |
69 |
Shaft M Coupling Retard |
|
NS |
70 |
Shaft M Gear Retard |
|
NS |
71 |
Guide M Front |
|
NS |
<< Back to Top of Page
Print Engine Parts - Fuser Assembly
No. |
Name/Description |
Qty |
Part Number |
0 |
Unit Fuser 110V
Unit Fuser 220V |
1
1 |
126E02480
126E02490 |
<< Back to Top of Page
Print Engine Parts - Main Driver Motor Assembly
No. |
Name/Description |
Qty |
Part Number |
0 |
Main Drive Motor Assy |
1 |
12744860 |
<< Back to Top of Page
Print Engine Parts - Exit Drive Motor Assembly
No. |
Name/Description |
Qty |
Part Number |
0 |
Exit Motor Assy |
1 |
12744870 |
<< Back to Top of Page
Print Engine Parts - Registration Transport Assembly
No. |
Name/Description |
Qty |
Part Number |
0 |
Reg Transport Assy |
1 |
059K39130 |
1 |
Guide P Regi Lower |
|
NS |
2 |
Roller regi Lower L |
|
NS |
3 |
Shaft Regi Upper |
|
NS |
4 |
Roller M Regi Idle S |
|
NS |
5 |
Roller M Regi Idle L |
|
NS |
6 |
Spring TS |
|
NS |
7 |
Paper Guide |
|
NS |
8 |
Guide P Regi Plate |
|
NS |
9 |
Holder M Sensor |
|
NS |
10 |
Photo Interrupter |
1 |
110K14300 |
11 |
Bush M Roller Regi L |
|
NS |
12 |
E-Ring |
|
NS |
13 |
Bush M Roller Regi L |
|
NS |
14 |
Spring ES |
|
NS |
15 |
CBF Harness MP Empty |
|
NS |
16 |
Washer Plain |
|
NS |
17 |
Cap M Wire PTL Upper |
|
NS |
18 |
Cap M Bushing Actuator |
|
NS |
19 |
Cap P Bushing Regi Lower |
|
NS |
20 |
PBA Main PTL1 |
|
NS |
<< Back to Top of Page
Print Engine Parts - Power Supply/Duplex Assembly
No. |
Name/Description |
Qty |
Part Number |
0 |
Power Supply Board (110 Volts) (with 1 and 2)
Power Supply Board (220 Volts) (with 1 and 2) |
1
1 |
105K27080
105K27090 |
1 |
SMPS-V1_HVPS
SMPS-V2_HVPS |
|
NS
NS |
2 |
Suplex Roller Assembly (with 2-1 - 2-14) |
1 |
059K39140 |
<< Back to Top of Page
Print Engine Parts - Paper Tray
No. |
Name/Description |
Qty |
Part Number |
0 |
Paper Tray (with 1 ~ 26) |
1 |
109R00722 |
<< Back to Top of Page
Print Engine Parts - Optional Lower Feeder Assembly
No. |
Name/Description |
Qty |
Part Number |
0 |
500 Sheet Feeder (with paper tray) |
1 |
097S03131 |
1 |
PMO Frame SCF |
|
NS |
2 |
Tray 3 Feed Assy |
1 |
059K39120 |
3 |
Spring Pick Up |
|
NS |
4 |
PMO Bushing TX |
|
NS |
5 |
Shaft Pick Up |
|
NS |
6 |
PMO Bearing Shaft |
|
NS |
7 |
MEA Unit Roller Feed |
|
NS |
8 |
Bearing Pick Up |
|
NS |
9 |
PMO Guid Inner SCF |
|
NS |
10 |
Tray 3 Retard Assy |
1 |
022E29540 |
11 |
Coupling Retard Shaft SCF |
|
NS |
12 |
Shaft Gear Retard |
|
NS |
13 |
Gear Pick Up Cam SCF |
|
NS |
14 |
Tray 3 Solenoid |
1 |
121E19280 |
15 |
Shaft Feed SCF |
|
NS |
16 |
Tray 3 Feed Clutch |
1 |
121E19290 |
17 |
Gear Regi Z25 |
|
NS |
18 |
ELA Unit Bracket SCF |
|
NS |
18-1 |
Tray 3 Feed Motor |
1 |
127E14650 |
19 |
IPR GND Spring Feed |
|
NS |
20 |
Photo Interrupter |
1 |
110K14300 |
21 |
Tray 3 Control Board |
1 |
960K12220 |
22 |
Tray 3 Interface Cable |
1 |
962K26730 |
23 |
Cable Photo Interrupter |
|
NS |
24 |
Tray 3 Empty Actuator |
1 |
120E26100 |
25 |
IPR GND Top |
|
NS |
26 |
Foot Rubber Hawk 16 |
|
NS |
27 |
IPR Bar Cross Bottom |
|
NS |
28 |
PMO Cover L SCF |
|
NS |
29 |
PMO Cover R SCF |
|
NS |
30 |
PMO Cover Dummy SCF |
|
NS |
31 |
CBF Harness SCF GND |
|
NS |
32 |
CBF Harness LIU GND |
|
NS |
33 |
CBF Harness OPE |
|
NS |
34 |
Bush Cable |
|
NS |
35 |
Paper Size Sensor Assy (with 36-1 ~ 36-3) |
1 |
110K14290 |
36 |
Harness Paper Size |
|
NS |
101 |
Screw Taptite |
|
NS |
102 |
Screw Taptite |
|
NS |
103 |
Screw Machine |
|
NS |
104 |
E-ring |
|
NS |
105 |
E-ring |
|
NS |
Supplies
Repair Kits, World Kits, and Repackaging Kits
Description |
Part Number |
World Kit |
061-4498-00 |
Phaser 3450 Getting Started Pack |
061-4499-00 |
Cushion Main Repackaging Phaser 3450 |
696E31910 |
Main Shipping Box, Repackaging |
696E31900 |
Power Cords
Description |
Part Number |
Cable Assy, 3,18AWG, 115 V, 98, 0 L |
161-0066-00 |
Cable PWR EURO 220 V , 99 L |
161-0066-09 |
Cable PWR U.K. 240 V, 96 L |
161-0066-10 |
Cable PWR AUST 240 V, 96 L |
161-0066-11 |
Cable Assy SWISS 220/240 V, 50 Hz |
161-0154-00 |
Cable Assy PWR. DANISH, 250 V |
161-0240-00 |
Cable Assy PWR, PRC |
161-0304-00 |
Power, 240 V, ARGENTINA |
161-0307-00 |
Upgrade Kits and Options
Description |
Part Number |
Memory
32 Mbytes, 8M x 32, PC133; Memory DIMM
64 Mbytes, 8M x 64, PC133; Memory DIMM
128 Mbytes, 16M x 64, PC133; Memory DIMM |
097S03132
097S03133
097S03136 |
500 Sheet Feeder with Tray |
097S03131 |
8 Mbytes Flash Memory DIMM |
097S03134 |
Network Interface Card (NIC) |
097S03130 |
500 Sheet Replacement Paper Tray |
109R00722 |
Consumables
Description |
Part Number |
Print Cartridge - Phaser 3450 Laser Printer
Standard-Capacity (5K)
High-Capacity (10K) |
106R00687
106R00688 |
Service Parts
Description |
Part Number |
Transfer Roller |
022E29520 |
Fuser Assembly (110 V)
Fuser Assembly (220 V) |
126E02480
126E02490 |
Hardware Kit |
600N01672 |
Software and Documentation
Description |
Part Number |
Software and Documentation CD |
063-3453-00 |
Service Manual |
071-0866-00 |
<< Back to Phaser 3450 Support...
|
|