Phaser 300X


Resetting the printer
The Reset Printer (RESET.PS) file resets the printer to its power-on conditions (not its factory default conditions), without turning the printer's power switch off and on. The power-on conditions include any custom changes made to the printer that are stored in the printer's NVRAM, or changes that are persistent across printer power cycles. For example, if you used a downloadable utility file to change the printer's name or to set a color correction, these are power-on conditions that are not altered by resetting the printer. Resetting the printer erases changes that are not persistent across printer power cycles, such as the Tektronix error handler utility.

This file restarts the printer as soon as all the jobs in its queue are finished. The printer remains unavailable while it initializes. Use the following files for your computer type.
Macintosh file name PC file name
Reset Printer and LaserWriter Utility RESET.PS

Macintosh users

Note:Do not use the Restart Printer command in the LaserWriter Utility's Utilities menu. Follow this procedure to reset the printer using the LaserWriter Utility to download the Reset Printer utility file.
  1. Install the utility files from the Phaser 300X printer's CD-ROM; refer to "Installing the printer's software" for instructions.
  2. Select the appropriate printer in the Chooser.
  3. Locate the LaserWriter Utility in the PhaserTools folder on your hard disk, and double-click its icon to start the application.
  4. Choose Download PostScript File from the Utilities menu.
  5. Select the Reset Printer file in the list then click Open.
    (This file was installed in the Printer Utilities folder inside the PhaserTools folder.)
    Note:The process of resetting the printer takes a few minutes to complete. You will receive a message on your screen indicating the connection has been interrupted during the reset. The connection is re-established after the reset, so you can ignore this message; click the Continue button.
  6. At the prompt Save PostScript output as: you are asked for a file name for saving printer output. Use either the default name given in the edit box or type in a new name.
  7. Click Save to send the file to the printer.
  8. If no output is returned by the printer, the LaserWriter Utility displays a dialog box; click OK to continue.

PC and workstation users

  1. Copy the utility files from the Phaser 300X printer's CD-ROM, or use the files directly from the CD-ROM.
  2. Use one of the following methods to send the RESET.PS file to the printer:
Support Home Page
Phaser 300X Support Page

Network Printers Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program