Macintosh users

Note:If you are using QuickDraw GX, you can use the Tektronix Phaser 300X GX driver to print a copy of the configuration page; refer to "Downloading printer utilities" for instructions.

1. Install the utility files from the Phaser 300X printer's CD-ROM; refer to "Installing the printer's software" for instructions.
2. Select the appropriate printer in the Chooser.
3. Locate the LaserWriter Utility in the PhaserTools folder on your hard disk, and double-click its icon to start the application.
4. Choose Download PostScript File from the Utilities menu.
5. Select the Configuration Page file from the list, then click Open. (This file was installed in the Printer Utilities folder inside the PhaserTools folder.)
6. At the prompt Save PostScript output as: you are asked for a file name for saving printer output. Use either the default name given in the edit box or type a new name.
7. Click Save to send the file to the printer.
8. If no output is returned by the printer, the LaserWriter Utility displays a dialog box; click OK to continue.

1. Copy the utility files from the Phaser 300X printer's CD-ROM, or use the files directly from the CD-ROM.
2. Use one of the following methods to send the PRNTCNFG.PS file to the printer:
   • PC users: Use the DOS COPY command to send the file to the printer. (Windows 3.1 users can also use the Copy command in the File Manager.)
   • Workstation users: Send the file to the printer as you would any PostScript file.