Sharing the printer on a network: Phaser 300X

Xerox.com

Phaser 300X

Sharing the printer on a network

Driver, utility files, and switch interactions

If your Phaser 300X printer is shared by other users on a network, using the downloadable utility files or the printer's rear panel switches to change the printer's default color correction setting can affect prints made by other users.

When you print from a supported driver with any TekColor color correction selection except Use Printer Setting, the driver selection overrides the following selections for prints made from the driver:
- A color correction utility file, if one has been downloaded to the printer.
- The selection made with the printer's rear panel switches.
When you print from a supported driver with the Use Printer Setting option, your images are printed with one of the following selections:
- A color correction utility file, if one has been downloaded to the printer.
- The selection made with the printer's rear panel switches.
When you print from a non-supported driver, your images are printed with one of the following selections:
- A color correction utility file, if one has been downloaded to the printer.
- The selection made with the printer's rear panel switches.
If the colors on your prints are not what you expected, print a configuration page to see the current color correction selection in the printer; see "Printing a configuration page" for instructions.

If the LaserWriter Utility does not work

The LaserWriter Utility cannot be used if the printer is connected to a print server. See your system administrator to temporarily remove the printer from the print server to download any of the PostScript utility files.

Support Home Page

Phaser 300X Support Page

Network Printers Support Home

Additional Information

			Register your Printer
			ASPs & TPMs
			About Software Support
			Color Connection
			Printer Warranties
			Material Safety Data Sheets
			Supplies & Cartridge Recycling Program

Survey SoftwareEnterprise Feedback Management