WorkCentre 4150
3.9
5
37
39
This is a great office printer!
The WorkCentre 4150 is a great printer/copier for a busy small office. It is easy to use and has all the features a busy small office needs, in a easy to use format. We've had this machine for over 3 years now and have not had any problems with it whatsoever! I highly recommend this product!
October 25, 2011
4150 is a workhourse
The 4150 is a office workhorse.
It is reliable and and there is very little down time.
Xerox service has been timely and usually any issues are resolved by phone or on the first service call.
I would recommend the machine.
May 22, 2012
This is product is so simple to use
If you want a machine that works when you need it, isn't high maintenance, and most people can figure out with a few pushes of the virtual buttons, this machine is for you.
My favorite feature is being able to set up my next printing function while it's currently working on my present task.
October 28, 2011
This machine has multiple problems
The upper tray feeddogs repeatedly fail and do not pull the paper. Scanning is the next problem. It will not scan a large, 30 page, document without splitting it in to two different docs. It is also slow to wake up and print
October 27, 2011
Average performance; parts don't hold up.
I liked this machine at first, but we have run across several issues that have had to be resolved after lengthy investigations. the parts do not hold up well and the software/firmware used are very sensitive.
October 25, 2011
It is OK
I like the multi function of this machine however we have had some issues with the paper jamming. It has been resolved but was a pain to deal with. I also don't like how long it takes to receive the information and then print even one single page document. The menu can get a little confusing to work through with the multi job function but it probably goes with the territory of having a machine like this. It is overall a good machine just a few items that can be irritating.
October 19, 2011
Xerox
We are very dissapointed in this machine. I have to keep restarting the machine in order to work.
March 18, 2011
Way to Go, Xerox
My Xerox copier performs as well as expected. I did have some difficulty in my initial startup efforts-- telephone tech support sent the same startup chip twice that didn't resolve the issue and it took a service technician to come onsite and discover what was actually needed to get the copier up and running. Since then it has been dependable. Thanks Xerox.
March 17, 2011